Popular Model Railway Scale and Gauges Explained | Railwayscenics
Facebook
Instagram
X Formerly Twitter

Scale and Gauges used in Railway Modelling

scale and gauges

Introduction.

Lots of people get confused between the different sizes of models available, and with the different scales and gauges when modelling model railways. Hopefully this will make things clearer.

A model trains size is the scale relationship between its size and the size of an actual train, usually measured as a ratio or as a millimetre to inch conversion. OO scale is said to be 4mm to a ft (4mm:ft) where 1 real foot is scaled down to 4mm, or 1 to 76 (1:76) or 76 times smaller than the real thing.

A model trains gauge is the distance between the inner edges of the two rails that it runs on.

Historically there are broadly two main groups in the UK:
1. Standard gauge which is based on a 4ft 8 1/2inch prototype, and there is also
2. Narrow gauge which includes any railway with a track gauge less than the standard gauge.

The more popular scales and gauges are discussed below. This is not a definitive list as there are many more, but these are the most common scale and gauge combinations used in modelling in the UK and represent a wide range of model sizes.

Small Scales.

T Gauge
0.61mm:1ft, 1:450 scale
3mm track gauge (inside track width)
This is a commercial gauge produced and used mainly in Japan.

Z Gauge
1.5mm to 1ft, 1:220 scale
6.5mm track gauge (inside track width)
This is a commercial gauge produced by Marklin in Germany. It is relatively expensive and specialist.

2mm Scales.

N Gauge
2mm to 1ft, 1:148 scale in UK
9mm track gauge (inside track width)
This gauge is half the size of 00 and therefore you should in theory be able to lay four times as much track. This is becoming a very popular gauge with a full range of locomotives, rolling stock and accessories available from many companies.

2mm Scale
2mm to 1ft, 1:152.3 scale
9.42mm track gauge (inside track width)
The purists of N gauge developed this scale. It is slightly more accurate than the mainstream scale of 1:148.

3mm Scales.

TT120 Gauge
2.54mm to 1ft, 1:120 scale
12mm track gauge (inside track width)
A new scale and range of products started by Peco Model Railways and is a more accure scale for 3mm modelliers.

TT Gauge
3mm to 1ft, 1:101.6 scale
12mm track gauge (inside track width)
This gauge originated in the USA, and was also produced at 2.5mm to 1ft, 1:120 scale. Enthusiasts using this scale need specialist support through the Three Millimetre Society.

4mm scales.

HO Gauge
3.5mm to 1ft, 1:87 scale
16.5mm track gauge (inside track width)
This is the major gauge used outside the UK. At 3.5mm to 1ft, the track gauge at 16.5mm is virtually exact to scale for the standard gauge. When using this gauge it must not be confused with 00 gauge, HO gauge is almost 15% smaller. One can run HO gauge rolling stock on 00 gauge layouts, the track gauges both being 16.5mm, but the difference in scale will immediately become very obvious.

00 Gauge
4mm to 1ft, 1:76 scale
16.5mm track gauge (inside track width)
This is the most popular scale for British modellers and is probably the best supported in the industry with a wide range of ready-to-run models, kits and accessories.. However the track gauge is considered too narrow to be accurate by many. This makes this scale a bit of a compromise. Smaller track profiles make this incorrect scaling less noticeable, and increasing the sleeper spacings makes it even less noticeable.

EM Gauge
4mm to 1ft, 1:76 scale
18.2mm track gauge (inside track width)
This scale is an attempt to make the 00 layout track gauge more realistic. At 18.2mm it still falls short of the ideal 18.83mm, but was felt by those involved to be near enough.

P4/S4 Gauge
4mm to 1ft, 1:76 scale
18.83mm track gauge (inside track width)
As EM is still slightly under scale, P4 was established. Locomotive and rolling stock kits are available to fit this gauge.

009 Gauge
4mm to 1ft, 1:76 scale
9.00mm track gauge (inside track width)
The most popular narrow gauge scale as this allows for the use of N gauge chassis and most 4mm accessories. Track and turnouts are available from a wide range of manufacturers.

00n3 Gauge
4mm to 1ft, 1:76 scale
12mm track gauge (inside track width)
Used for models of the Isle of Man railways and the Irish 3ft gauge systems.

7mm Scales

0 Gauge
7mm to 1ft, 1:43.5 scale
32mm track gauge (inside track width)
This scale has become more popular due to the availability of a large range of quality locomotive and rolling stock kits. Technically the inside track width of 32mm is 3% under scale.

7mm to 1ft, 1:45 scale
32mm track gauge (inside track width)
Scale used mainly in Germany, Japan, Russia, Czech

7mm to 1ft, 1:48 scale
32mm track gauge (inside track width)
This scale is commonly found in the USA.

Scale Seven
7mm to 1ft, 1:43.5 scale
33mm track gauge (inside track width)
This is the scale track option for 7mm scale with a 33mm width between tracks.

0-16.5 Gauge
7mm to 1ft, 1:43.5 scale
16.5mm track gauge (inside track width)
Uses OO gauge spaced track allowing commercial OO gauge locomotive chassis to be used under narrow gauge 7mm kits.

Larger scales

Gauge 1
10mm to 1ft 1:32 scale
45mm track gauge (inside track width)
This scale is mainly used outside for electric and live steam operation.

Scale Comparison chart

Name Gauge Scale mm/foot Notes
Standard 4ft 8.5ins 1:1 304.8 World Standard
Broad 7ft 1:1 304.8 Brunels Gauge
G 45mm 1:24-8 15 Narrow Gauge 3ft
Gn15 16.5mm 1:24 15 Representing 15ins Gauge
SM45 45mm 1:19 16 Narrow Gauge 3ft
SM32 32mm 1:19 16 Narrow Gauge 2ft
1 45mm 1:30.5 10  
0 32mm 1:43.5 7  
Scale7 33mm 1:43.5 7  
016.5 16.5mm 1:43.5 7 Narrow Gauge 2ft 3ins but used for 2ft 0ins - 2ft 6ins
0n30 16.5 mm 1:48 6..4 USA Narrow Gauge 2ft 6ins
09 9mm 1:43.5 7 Miniature Gauge 15ins
S 7/8ins 1:64 3/16ins  
H0 16.5mm 1:87.1 3.5 Worlds Most Popular
H0n3 10.5mm 1:87 3.5  
00 16.5mm 1:76.2 4 UKs Most Popular
00 Broad Gauge 28mm 1:76.2 4 Brunels Broad Gauge in 00
00n3 12mm 1:76.2 4  
009 9mm 1:76.2 4  
EM 18.2mm 1:76.2 4  
P4 18.83mm 1:76.2 4 Exact Scale 4mm
3mm (TT) 12mm 1:101.6 3  
TT120 12mm 1:120 2.54  
N 9mm 1:148 2  
2mm Finescale 9.42mm 1:152.4 2  
Z 6.5mm 1:220 1.4 Smallest Commercially Available

Thickness chart

We found this handy table that gives the actual dimensions of thicknesses of different sheets sizes. Plastic sheets and extrusions are generally measured in THOU so this conversion chart gives metric and imperial real thicknesses of those sheets.

Material Thickness Prototype Dimensions
Thou Actual Inches Actual mm Inches 2mm Inches 3mm Inches 3.5mm Inches 4mm Inches 7mm
5 0.005 0.127 1 3/4 5/16 1/2 1/4
10 0.010 0.254 1 1/2 1 1/8 7/16 3/4 1/2
15 0.015 0.381 2 1 1/2 1 1/4 1 5/8
20 0.020 0.508 3 2 1/4 1 7/8 1 1/2 3/4
25 0.025 0.635 4 3 2 1/2 2 1
30 0.030 0.762 5 3 5/8 3 2 1/4 1 1/2
40 0.040 1.1016 6 4 1/2 3 3/4 3 1 3/4
50 0.050 1.27 8 6 5 4 2
60 0.060 1.524 9 6 3/4 5 5/8 4 1/2 2 1/2
70 0.070 1.778 11 8 1/4 6 13/16 5 1/2 3
80 0.080 2.03 12 9 7 1/2 6 3 1/2
90 0.090 2.286 14 10 1/2 8 7/8 7 4
100 0.100 2.54 16 12 10 8 4 1/2