Milliput Black is a two part epoxy filler. Each pack contains two sticks which should be completely kneaded together by hand which can then be sculpted, turned, sawn, drilled, tapped, filed, sandpapered, painted or cellulose sprayed.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25 degC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an
elapse of time equal to the setting time at the same temperature.
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput
is not intended as a thin layer adhesive and should not be used where a paste or thin glue is indicated. Milliput will set under water and is heat resistant up to 130
Milliput should be stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.