A miniature red and Green bi-colour 3mm light emitting diode with a common anode giving a uniform light output and low power consumption housed in a milky white package. Suitable for PCB or panel mount.
Diodes are connected in a common anode configuration. Common anode is the centre leg, which is where the resistor should be fitted.
These LEDs DO require a series resistor which is not included, but are available separately. The resistors listed below are the minimum required for safe operation.
If operating from a 9v DC supply use 220R Model Number 228-504 carbon film resistor.
If operating from a 12v DC supply use 330R Model Number 228-506 carbon film resistor.
If operating from a 16v DC supply use 470R Model Number 228-508 carbon film resistor.
Sold individually so you only buy what you need.
For more information on using our LEDs please visit our LED help page