This is a kit of electrical components to make a home made static grass applicator that is powered by either battery or 12v DC power which follows the latest instructional video from Boulder Creek Junction.
The video can be found here.
Please watch and follow the video as these items can be dangerous if wired or assembled incorrectly.
This version gives the option to power from a PP3 9v battery, or a 12v plug in power supply unit which is not included.
You may need in addition to the components supplied some material to insulate the soldered wire connections for safety, and a small block of wood as mentioned in the video.
If needed we suggest using the following 2 amp plug in power supply unit. Model numbers 231-003.
1 x Negative Ion generator
1 x 9v PP3 battery connector with leads
1 x 12v DC panel mount input connector
1 x On - Off - On rectangular rocker switch
1 x Red 3mm standard LED
1 x Green 3mm standard LED
2 x 2.2k Carbon film resistor
2 x 1000v diode
1 x Small crocodile clip to fit to end of output wire
1 x Small nut and bolt to hold battery in place.
1 x Small screw to secure block of wood in place.
1 x Pair of blue crimp connectors for wire soldered to mesh
1 x 0.75m Length of black 0.75mm additional wire for all other wiring including output wire
1 x Wiring diagram
Contents of Package
1 x Static grass applicator electrical kit