JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Yellow/Red 16/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow/Red 16/0.2mm Stranded Layout Equipment Wire 10m Coil

Description 10 metre coil of high quality Yellow/Red 16/0.2(0.50mm) Approx 20 AWG multi-strand equipment wire rated at 3 amps for general layout wiring projects on both DC and DCC layouts.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used as DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours and lengths. Specification Colour: Yellow/Red
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow/Red 16/0.2 multi-strand equipment wire in a 10m coil.…

Yellow/Black 16/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow/Black 16/0.2mm Stranded Layout Equipment Wire 10m Coil

Description 10 metre coil of high quality Yellow/Black 16/0.2(0.50mm) Approx 20 AWG multi-strand equipment wire rated at 3 amps for general layout wiring projects on both DC and DCC layouts.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used as DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours and lengths. Specification Colour: Yellow/Black
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow/Black 16/0.2 multi-strand equipment wire in a 10m coil.…

Yellow Wood With Flaking Paint Texture Sheet Download

Yellow Wood With Flaking Paint Texture Sheet Download

Description Worn and flaking yellow painted wood texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Planks are a scale 6 inches wide and run parallel to 284mm edge.

By cutting these sheets into strips of three planks it is possible to fold the lower plank behind and add strips like real overlapped planks.

Sheet also contains a strip of matching plain colour.

Sheet size: A4 284mm x 194mm.

This sheet will match any of our models that use our yellow painted wood texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of yellow flaking painted wood texture paper.
1 x A4 sheet of printing hints and tips.…

Yellow Masking Tape Airbrush or Brush 18mm x 50m

Yellow Masking Tape Airbrush or Brush 18mm x 50m

Description
This acid free masking tape can be used on all types of models and with all types of paints. A 50 metre length of 18mm wide masking tape which is ideal for modelling, airbrushing, arts, craft, hobby and even those smaller DIY tasks around the home. The thin tape helps to prevent paint bleed and paint lines. It has excellent release properties, without leaving any adhesive residue. Package contents
1 x 18mm x 50m reel yellow fine line masking tape…

Yellow Masking Tape Airbrush or Brush 12mm x 50m

Yellow Masking Tape Airbrush or Brush 12mm x 50m

Description
This acid free masking tape can be used on all types of models and with all types of paints. A 50 metre length of 12mm wide masking tape which is ideal for modelling, airbrushing, arts, craft, hobby and even those smaller DIY tasks around the home. The thin tape helps to prevent paint bleed and paint lines. It has excellent release properties, without leaving any adhesive residue. Package contents
1 x 12mm x 50m reel yellow fine line masking tape…

Yellow Cut Stone Block Walling Texture Sheet Download

Yellow Cut Stone Block Walling Texture Sheet Download

Description Yellow stone block walling texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Sheet size: A4 284mm x 194mm. Stone courses run parallel to 294mm edge. This sheet also includes a matching strip that can be used as quoins, window surrounds, window sills and ledges and other decorative areas.

This sheet will match any of our models that use our yellow stone block walling texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of yellow stone block walling texture paper.
1 x A4 sheet of printing hints and tips.…

Yellow 7/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 7/0.2mm Stranded Layout Equipment Wire 2m Coil

Description 2 metres of high quality Yellow 7/0.2mm (0.2mm sq) Approx 24 AWG equipment wire for general layout wiring projects. Suitable for up to 1.4 amps current.

Ideal for lighting circuits, signals and a multitude of other low current applications. Should not be used as high current DCC bus wire or for point motor wiring where a CDU is fitted. Specification Colour: Yellow
Rating: 1.4Amps @ 1,000V RMS max
Wall cover: PVC 0.3mm to DEF61-12 Type 2 and BS4808
O/D: 1.2mm nominal
Core: Stranded, 7 x 0.2mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 2 metre coil of 7 x 0.2mm Yellow multi core layout equipment wire.…

Yellow 7/0.2mm Flexible Layout Equipment Wire 5m Coil

Yellow 7/0.2mm Flexible Layout Equipment Wire 5m Coil

Description 5 metres of high quality Yellow 7/0.2mm (0.2mm sq) Approx 24 AWG equipment wire for general layout wiring projects. Suitable for up to 1.4 amps current.

Ideal for lighting circuits, signals and a multitude of other low current applications. Should not use as high current DCC bus wire or for point motor wiring. Specification Colour: Yellow
Rating: 1.4Amps @ 1,000V RMS max
Wall cover: PVC 0.3mm to DEF61-12 Type 2 and BS4808
O/D: 1.2mm nominal
Core: Stranded, 7 x 0.2mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 5 metre coil of 7 x 0.2mm Yellow multi core layout equipment wire.…

Yellow 6.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 6.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 6.4mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 3.2mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 6.4mm.
Internal Diameter after shrinking: 3.2mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 6.4mm x 1.2m heat shrink tube.…

Yellow 55/0.1mm Extra Flexible Test Lead Wire 2m Coil

Yellow 55/0.1mm Extra Flexible Test Lead Wire 2m Coil

Description Yellow 55/0.1(0.43mm) Approx 21 AWG multi-strand very flexible wire in a 2 metre coil.

Ideal for making test leads. Suitable also for the lead on homemade static grass applicators using our negative ion generators.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 6.0A @ 1,000V RMS max
O/D: 2.8 mm nominal
Wall cover: PVC 0.9 mm to BS 6746
Core: Stranded, 55 x 0.1 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 55/0.1 multi-strand flexible wire in a 2m coil.…

Yellow 4.8mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 4.8mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 4.8mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 2.8mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 4.8mm.
Internal Diameter after shrinking: 2.4mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 4.8mm x 1.2m heat shrink tube.…

Yellow 32/0.2mm Stranded Layout Equipment Wire 5m Coil

Yellow 32/0.2mm Stranded Layout Equipment Wire 5m Coil

Description 5 metre coil of general purpose Yellow 32/0.2 multi-core equipment layout wire rated up to 6 amps and can be used to wire most heavy current electrical accessories for model railway layouts.

This should be used for longer runs on DCC power bus cables and if you are using any form of power booster in the circuit.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 6A at 1500v RMS max
O/D: 2.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 32 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 32/0.2 multi-strand equipment wire in a 5mtr coil.…

Yellow 32/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 32/0.2mm Stranded Layout Equipment Wire 2m Coil

Description Yellow 32/0.2(0.70mm) Approx 17 AWG multi-strand equipment wire for general layout wiring projects in a 2 metre coil.

This wire is rated at 6.0 amps which makes it suitable for larger DCC bus wiring, and for other projects where a very high current draw is expected.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 6.0 amp @ 1,500V RMS max
O/D: 2.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 32 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 32/0.2 multi-strand equipment wire in a 2m coil.…

Yellow 32/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow 32/0.2mm Stranded Layout Equipment Wire 10m Coil

Description Yellow 32/0.2mm (1.00mm sq) 18 AWG 6 Amps equipment wire for wiring most heavy current electrical accessories for model railway layouts, including longer run DCC power bus cables.

We recommend using this wire for DCC track power bus wiring if you are using any form of power booster.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 6Amps at 1500v RMS max
O/D: 2.6mm nominal
Wall cover: PVC 0.3mm to DEF61-12 Type 2 and BS4808
Core: Stranded, 32 x 0.2mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 32/0.2 multi-strand equipment wire in a 10mtr coil.…

Yellow 32/0.2 Stranded Layout Equipment Wire 100m Reel

Yellow 32/0.2 Stranded Layout Equipment Wire 100m Reel

Description A 100 metre reel of Yellow 32/0.2mm 1.00mm sq Approx 17 AWG multi-core equipment wire for wiring most accessories for model railway layouts.

Being rated at 6amps this layout wire is suitable for longer DCC power bus wires on most scales of model railway layouts, and those systems that require a larger power.

Can be used with our red or blue scotchloks to join dropper wires to DCC power bus wiring.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 1500V 6A at 1500v RMS max
O/D: 2.6mm nominal
Cross Section: 1mm sq
Approx AWG: 17
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 32 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 100m reel 32/0.2mm Yellow stranded layout equipment wire.…

Yellow 30/0.25mm Tri Rated Heavy Duty Dropper Wire 10m Coil

Yellow 30/0.25mm Tri Rated Heavy Duty Dropper Wire 10m Coil

Description A 10 metre coil of general purpose Yellow 30/0.25mm (1.5mm sq) Approx 16 AWG stranded copper core tri-rated wire for wiring DCC power bus wires on large scale layouts.

This size wire is overkill for most layout and should only be used where maximum currents are high.

This wire can be used with our red scotchlok style connectors.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 21Amps at 1000v RMS max
O/D: 3.3mm nominal
Wall cover: PVC 0.8mm to BS6746
Core: Stranded, 30 x 0.25mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 10 Metre coil of 30/0.25mm Yellow tri-rated cable.…

Yellow 3.2mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 3.2mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 3.2mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 1.6mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 3.2mm.
Internal Diameter after shrinking: 1.6mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 3.2mm x 1.2m heat shrink tube.…

Yellow 24/0.2mm Stranded Layout Equipment Wire 5m Coil

Yellow 24/0.2mm Stranded Layout Equipment Wire 5m Coil

Description Yellow 24/0.2(0.70mm) Approx 18 or 19 AWG multi-strand equipment wire for general layout wiring projects in a 5 metre coil.

This wire is rated at 4.5 amps which makes it suitable for smaller DCC bus wiring, and where a higher current draw could be expected.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 4.5 amp @ 1,000V RMS max
O/D: 2.3mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 24/0.2 multi-strand equipment wire in a 5mtr coil.…

Yellow 24/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 24/0.2mm Stranded Layout Equipment Wire 2m Coil

Description Yellow 24/0.2(0.70mm) Approx 18 or 19 AWG multi-strand equipment wire for general layout wiring projects in a 2 metre coil.

This wire is rated at 4.5 amps which makes it suitable for smaller DCC bus wiring, and where a higher current draw could be expected.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 4.5 amp @ 1,000V RMS max
O/D: 2.3mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 24/0.2 multi-strand equipment wire in a 2m coil.…

Yellow 24/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow 24/0.2mm Stranded Layout Equipment Wire 10m Coil

Description Yellow 24/0.2(0.70mm) Approx 18 or 19 AWG multi-strand equipment wire for general layout wiring projects in a 10 metre coil.

This wire is rated at 4.5 amps which makes it suitable for smaller DCC bus wiring, and where a higher current draw could be expected.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 4.5 amp @ 1,000V RMS max
O/D: 2.3mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 24/0.2 multi-strand equipment wire in a 10mtr coil.…

Yellow 24/0.2 Stranded Layout Equipment Wire 100m Reel

Yellow 24/0.2 Stranded Layout Equipment Wire 100m Reel

Description A 100 metre reel of Yellow 24/0.2mm (0.75mm sq) Approx 18 or 19 AWG multi-core equipment wire for wiring most accessories for model railway layouts.

Being rated at 4.5amps this layout wire is suitable for shorter DCC power bus wires, and as power feeds to some types of slow action point motors.

Can be used with our red or blue scotchloks to join dropper wires to DCC power bus wiring.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 4.5 A @ 1,000V RMS max
O/D: 2.3 mm nominal
Cross Section: 0.75mm sq
Approx AWG: 18/19
Wall cover: PVC 0.4 mm to DEF61-12 Type 2
Core: Stranded, 24 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 100m reel 24/0.2mm Yellow stranded layout equipment wire.…

Yellow 2.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 2.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 2.4mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 1.2mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 2.4mm.
Internal Diameter after shrinking: 1.2mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 2.4mm x 1.2m heat shrink tube.…

Yellow 16/0.2mm Stranded Layout Equipment Wire 5m Coil

Yellow 16/0.2mm Stranded Layout Equipment Wire 5m Coil

Description High quality Yellow 16/0.2mm (0.50mm sq) Approx 20 AWG multi-strand equipment wire for general layout wiring projects in a 5 metre coil.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used to wire DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 16/0.2 multi-strand equipment wire in a 5 mtr coil.…

Yellow 16/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 16/0.2mm Stranded Layout Equipment Wire 2m Coil

Description High quality Yellow 16/0.2(0.50mm) Approx 20 AWG multi-strand equipment wire for general layout wiring projects in a 2 metre coil.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used to wire DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 16/0.2 multi-strand equipment wire in a 2m coil.…

Result Pages: