JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Yellow / Red Buffer Stop With Red 12v LED 00 Gauge

Yellow / Red Buffer Stop With Red 12v LED 00 Gauge

Description Hornby R083 rail built buffer stop painted red and yellow with a red LED fitted to the centre.

No wiring is required as the electrical connection is made when the buffer stop is clipped onto the rails.

Suitable for use with 12v DC input voltage.

Should also clip onto Peco tracks. Contents of Package 00 Gauge Rail built buffer stop with red LED…

Yellow 1.6mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 1.6mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 1.6mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 1.2mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 1.6mm.
Internal Diameter after shrinking: 0.8mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 1.6mm x 1.2m heat shrink tubing.…

Yellow 1/0.6 Single Core Layout Equipment Wire 100m Reel

Yellow 1/0.6 Single Core Layout Equipment Wire 100m Reel

Description A 100 metre reel of 01/0.6 Yellow single solid core layout equipment wire for model railway layout wiring.

This wire is rated at 1.8amps and is especially suited for DCC dropper wires, and it can easily be soldered to your DCC bus cables.

Being solid cored the wire will stay and hold its shape without cable ties or clips.

Should not be used with our red or blue scotchloks due to the solid core in this wire.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 1.8 A @ 1,000V RMS max
O/D: 1.2mm nominal
Wall cover: PVC 0.3mm to DEF61-12 Type 2
Core: Solid, 0.6 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 100m reel 1/0.6 Yellow single core layout wire.…

Yellow 1/0.6mm Single Core Equipment Layout Wire 2m Coil

Yellow 1/0.6mm Single Core Equipment Layout Wire 2m Coil

Description Yellow 1/0.6mm 0.02mm sq single core equipment and layout wire for general layout wiring sold in a 2 metre coil.

Rated up to 1.8 amps and suitable for wiring DCC track feed dropper wires.

Should not be used with our red scotchloks due to solid core. Wire should be soldered to the DCC bus wires. Specification Colour: Yellow
Rating: 1.8 A @ 1,000V RMS max
O/D: 1.2 mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Solid, 0.6 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 2m coil of Yellow 1/0.6mm single core equipment and layout wire.…

Yellow 16/0.2 Stranded Layout Equipment Wire 100m Reel

Yellow 16/0.2 Stranded Layout Equipment Wire 100m Reel

Description A general purpose 100 metre reel of Yellow 16/0.2 (0.50mm sq) Approx 20 AWG multi-strand equipment wire rated at 3 amps for general layout wiring projects on both DC and DCC layouts

This wire is rated up to 3amps and is suited for DCC dropper wires, and all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring..

Can be used with our red scotchloks to join dropper wires to DCC power bus wiring.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 3.0 A @ 1,000V RMS max
O/D: 1.6 mm nominal
Cross Section: 0.5mm sq
Approx AWG: 20
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 100m reel 16/0.2mm Yellow stranded layout wire.…

Yellow 16/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow 16/0.2mm Stranded Layout Equipment Wire 10m Coil

Description 10 metre coil of high quality Yellow 16/0.2(0.50mm) Approx 20 AWG multi-strand equipment wire rated at 3 amps for general layout wiring projects on both DC and DCC layouts.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used as DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours and lengths. Specification Colour: Yellow
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 16/0.2 multi-strand equipment wire in a 10m coil.…

Yellow 16/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 16/0.2mm Stranded Layout Equipment Wire 2m Coil

Description High quality Yellow 16/0.2(0.50mm) Approx 20 AWG multi-strand equipment wire for general layout wiring projects in a 2 metre coil.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used to wire DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 16/0.2 multi-strand equipment wire in a 2m coil.…

Yellow 16/0.2mm Stranded Layout Equipment Wire 5m Coil

Yellow 16/0.2mm Stranded Layout Equipment Wire 5m Coil

Description High quality Yellow 16/0.2mm (0.50mm sq) Approx 20 AWG multi-strand equipment wire for general layout wiring projects in a 5 metre coil.

This is thicker and heavier than the 7/0.2mm wire you often get from model shops and can be used to wire DCC dropper wires.

It can also be used to wire all types of solenoid point motors from manufacturers such as Peco, Hornby, Seep, etc. and other higher current general purpose wiring.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 3.0 amp @ 1,000V RMS max
O/D: 1.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 16/0.2 multi-strand equipment wire in a 5 mtr coil.…

Yellow 2.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 2.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 2.4mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 1.2mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 2.4mm.
Internal Diameter after shrinking: 1.2mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 2.4mm x 1.2m heat shrink tube.…

Yellow 24/0.2 Stranded Layout Equipment Wire 100m Reel

Yellow 24/0.2 Stranded Layout Equipment Wire 100m Reel

Description A 100 metre reel of Yellow 24/0.2mm (0.75mm sq) Approx 18 or 19 AWG multi-core equipment wire for wiring most accessories for model railway layouts.

Being rated at 4.5amps this layout wire is suitable for shorter DCC power bus wires, and as power feeds to some types of slow action point motors.

Can be used with our red or blue scotchloks to join dropper wires to DCC power bus wiring.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 4.5 A @ 1,000V RMS max
O/D: 2.3 mm nominal
Cross Section: 0.75mm sq
Approx AWG: 18/19
Wall cover: PVC 0.4 mm to DEF61-12 Type 2
Core: Stranded, 24 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 100m reel 24/0.2mm Yellow stranded layout equipment wire.…

Yellow 24/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow 24/0.2mm Stranded Layout Equipment Wire 10m Coil

Description Yellow 24/0.2(0.70mm) Approx 18 or 19 AWG multi-strand equipment wire for general layout wiring projects in a 10 metre coil.

This wire is rated at 4.5 amps which makes it suitable for smaller DCC bus wiring, and where a higher current draw could be expected.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 4.5 amp @ 1,000V RMS max
O/D: 2.3mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 24/0.2 multi-strand equipment wire in a 10mtr coil.…

Yellow 24/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 24/0.2mm Stranded Layout Equipment Wire 2m Coil

Description Yellow 24/0.2(0.70mm) Approx 18 or 19 AWG multi-strand equipment wire for general layout wiring projects in a 2 metre coil.

This wire is rated at 4.5 amps which makes it suitable for smaller DCC bus wiring, and where a higher current draw could be expected.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 4.5 amp @ 1,000V RMS max
O/D: 2.3mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 24/0.2 multi-strand equipment wire in a 2m coil.…

Yellow 24/0.2mm Stranded Layout Equipment Wire 5m Coil

Yellow 24/0.2mm Stranded Layout Equipment Wire 5m Coil

Description Yellow 24/0.2(0.70mm) Approx 18 or 19 AWG multi-strand equipment wire for general layout wiring projects in a 5 metre coil.

This wire is rated at 4.5 amps which makes it suitable for smaller DCC bus wiring, and where a higher current draw could be expected.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 4.5 amp @ 1,000V RMS max
O/D: 2.3mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 16 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 24/0.2 multi-strand equipment wire in a 5mtr coil.…

Yellow 3.2mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 3.2mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 3.2mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 1.6mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 3.2mm.
Internal Diameter after shrinking: 1.6mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 3.2mm x 1.2m heat shrink tube.…

Yellow 30/0.25mm Tri Rated Heavy Duty Dropper Wire 10m Coil

Yellow 30/0.25mm Tri Rated Heavy Duty Dropper Wire 10m Coil

Description A 10 metre coil of general purpose Yellow 30/0.25mm (1.5mm sq) Approx 16 AWG stranded copper core tri-rated wire for wiring DCC power bus wires on large scale layouts.

This size wire is overkill for most layout and should only be used where maximum currents are high.

This wire can be used with our red scotchlok style connectors.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 21Amps at 1000v RMS max
O/D: 3.3mm nominal
Wall cover: PVC 0.8mm to BS6746
Core: Stranded, 30 x 0.25mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 10 Metre coil of 30/0.25mm Yellow tri-rated cable.…

Yellow 32/0.2 Stranded Layout Equipment Wire 100m Reel

Yellow 32/0.2 Stranded Layout Equipment Wire 100m Reel

Description A 100 metre reel of Yellow 32/0.2mm 1.00mm sq Approx 17 AWG multi-core equipment wire for wiring most accessories for model railway layouts.

Being rated at 6amps this layout wire is suitable for longer DCC power bus wires on most scales of model railway layouts, and those systems that require a larger power.

Can be used with our red or blue scotchloks to join dropper wires to DCC power bus wiring.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 1500V 6A at 1500v RMS max
O/D: 2.6mm nominal
Cross Section: 1mm sq
Approx AWG: 17
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 32 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 100m reel 32/0.2mm Yellow stranded layout equipment wire.…

Yellow 32/0.2mm Stranded Layout Equipment Wire 10m Coil

Yellow 32/0.2mm Stranded Layout Equipment Wire 10m Coil

Description Yellow 32/0.2mm (1.00mm sq) 18 AWG 6 Amps equipment wire for wiring most heavy current electrical accessories for model railway layouts, including longer run DCC power bus cables.

We recommend using this wire for DCC track power bus wiring if you are using any form of power booster.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

For smaller quantities or alternative colours see our other wire products. Specification Colour: Yellow
Rating: 6Amps at 1500v RMS max
O/D: 2.6mm nominal
Wall cover: PVC 0.3mm to DEF61-12 Type 2 and BS4808
Core: Stranded, 32 x 0.2mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 32/0.2 multi-strand equipment wire in a 10mtr coil.…

Yellow 32/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 32/0.2mm Stranded Layout Equipment Wire 2m Coil

Description Yellow 32/0.2(0.70mm) Approx 17 AWG multi-strand equipment wire for general layout wiring projects in a 2 metre coil.

This wire is rated at 6.0 amps which makes it suitable for larger DCC bus wiring, and for other projects where a very high current draw is expected.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 6.0 amp @ 1,500V RMS max
O/D: 2.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 32 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 32/0.2 multi-strand equipment wire in a 2m coil.…

Yellow 32/0.2mm Stranded Layout Equipment Wire 5m Coil

Yellow 32/0.2mm Stranded Layout Equipment Wire 5m Coil

Description 5 metre coil of general purpose Yellow 32/0.2 multi-core equipment layout wire rated up to 6 amps and can be used to wire most heavy current electrical accessories for model railway layouts.

This should be used for longer runs on DCC power bus cables and if you are using any form of power booster in the circuit.

It is also suitable for power feed wiring on certain point motors and other electronic circuitry power feeds.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 6A at 1500v RMS max
O/D: 2.6mm nominal
Wall cover: PVC 0.3 mm to DEF61-12 Type 2
Core: Stranded, 32 x 0.2 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 32/0.2 multi-strand equipment wire in a 5mtr coil.…

Yellow 4.8mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 4.8mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 4.8mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 2.8mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 4.8mm.
Internal Diameter after shrinking: 2.4mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 4.8mm x 1.2m heat shrink tube.…

Yellow 55/0.1mm Extra Flexible Test Lead Wire 2m Coil

Yellow 55/0.1mm Extra Flexible Test Lead Wire 2m Coil

Description Yellow 55/0.1(0.43mm) Approx 21 AWG multi-strand very flexible wire in a 2 metre coil.

Ideal for making test leads. Suitable also for the lead on homemade static grass applicators using our negative ion generators.

See other listings for alternative colours. Specification Colour: Yellow
Rating: 6.0A @ 1,000V RMS max
O/D: 2.8 mm nominal
Wall cover: PVC 0.9 mm to BS 6746
Core: Stranded, 55 x 0.1 mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x Yellow 55/0.1 multi-strand flexible wire in a 2m coil.…

Yellow 6.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Yellow 6.4mm x 1.2m Heat Shrink Tube 2:1 Ratio

Description Yellow 6.4mm x 1.2 metres non adhesive flexible, single thin wall, 2:1 ratio polyolefin heatshrink sleeving suitable for a wide range of applications.

It shrinks to a ratio of 2:1 when heat is applied. This sleeve will shrink to 3.2mm. Shrinking temperature starts at +70degC and totally shrunk at 115degC.

Applications include general insulation, mechanical protection and colour identification of wire cables and harnesses, connectors, terminals and electronic and mechanical components.

Supplied in 1.2 metre lengths. Dimensions Length: 1.2m.
Shrinkage ratio: 2:1.
Internal Diameter before shrinking: 6.4mm.
Internal Diameter after shrinking: 3.2mm.
RoHS compliant: Yes Contents of Package 1 x Yellow 6.4mm x 1.2m heat shrink tube.…

Yellow 7/0.2mm Flexible Layout Equipment Wire 5m Coil

Yellow 7/0.2mm Flexible Layout Equipment Wire 5m Coil

Description 5 metres of high quality Yellow 7/0.2mm (0.2mm sq) Approx 24 AWG equipment wire for general layout wiring projects. Suitable for up to 1.4 amps current.

Ideal for lighting circuits, signals and a multitude of other low current applications. Should not use as high current DCC bus wire or for point motor wiring. Specification Colour: Yellow
Rating: 1.4Amps @ 1,000V RMS max
Wall cover: PVC 0.3mm to DEF61-12 Type 2 and BS4808
O/D: 1.2mm nominal
Core: Stranded, 7 x 0.2mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 5 metre coil of 7 x 0.2mm Yellow multi core layout equipment wire.…

Yellow 7/0.2mm Stranded Layout Equipment Wire 2m Coil

Yellow 7/0.2mm Stranded Layout Equipment Wire 2m Coil

Description 2 metres of high quality Yellow 7/0.2mm (0.2mm sq) Approx 24 AWG equipment wire for general layout wiring projects. Suitable for up to 1.4 amps current.

Ideal for lighting circuits, signals and a multitude of other low current applications. Should not be used as high current DCC bus wire or for point motor wiring where a CDU is fitted. Specification Colour: Yellow
Rating: 1.4Amps @ 1,000V RMS max
Wall cover: PVC 0.3mm to DEF61-12 Type 2 and BS4808
O/D: 1.2mm nominal
Core: Stranded, 7 x 0.2mm tinned copper conductor
RoHS compliant: Yes Contents of Package 1 x 2 metre coil of 7 x 0.2mm Yellow multi core layout equipment wire.…

Result Pages: