JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

  • Basket cart empty
  • In Your Basket

    0 item(s) totalling £0.00
Large DPST OFF-ON standard toggle switch

Large DPST OFF-ON standard toggle switch

Description
DPST Double Pole Single Throw OFF-ON standard size toggle switch complete with On/Off plate. Rated at 250V 1.5A. Dimensions
Width: 14mm
Height: 14mm
Depth: 25mm
Total height: 42.5mm (including terminals)
Panel cut-out: 12mm Contents of Package
1 x DPST OFF-ON Standard toggle switch.…

Large Flat Washers BZP M8 x 25mm Pkt 4

Large Flat Washers BZP M8 x 25mm Pkt 4

Description Large Flat Washers BZP M8 x 25mm.

These are ideal for spreading the load and will prevent the bolts and nuts pulling into the wooden framework when used for baseboard joining.

Sold in packets of 4. Contents of Package 4 x M8 BZP large Flat Washers.…

Large Or Full Turntable Motorising Kit For Most Turntable Kits

Large Or Full Turntable Motorising Kit For Most Turntable Kits

Description Kit of components that can be used to motorize and drive most makes of turntable kits including the Dapol and Peco kits.

This kit is complete and includes everything required to battery operate a turntable apart from the batteries. It is also possible to swap the batteries for a regulated 6vdc power supply.

Visual alignment with outlet tracks is possible due to the incorporated gear reduction and the slow rotation.

The clearbox motor can be adjusted to rotate between 2.6RPM to 625RPM. Further reduction is obtained by using worm gear and large gear enabling visual alignment of tracks.

Our range of red 4mm bore plastic pulleys will also fit this kit.

This kit is very similar to the Expo kit part number 262-11 and also the kit from Frizinghall Models. Kit Contents 1 x 1.5 - 6 volt clearbox motor
1 x 4 AA battery holder (Batteries not included)
1 x 9 volt battery clip to connect motor to batteries
1 x SPDT On Off On miniature toggle switch
5 metres of blue 7/0.2 wire
5 metres of white 7/0.2 wire
1 x worm gear
1 x large 58 tooth 60mm diameter plastic gear
1 x 150mm long 4mm diameter steel shaft Contents of Package 1 x Large turntable motorising kit.…

Large SPST OFF-ON standard toggle switch

Large SPST OFF-ON standard toggle switch

Description
SPST Single Pole Single Throw OFF-ON standard size toggle switch complete with On/Off plate. Rated at 250V 1.5A. Dimensions
Width: 14mm
Height: 14mm
Depth: 25mm
Total height: 42.5mm (including terminals)
Panel cut-out: 12mm Contents of Package
1 x SPST OFF-ON Standard toggle switch.…

Latching On-Off Push Button Switch with Red Dome Button

Latching On-Off Push Button Switch with Red Dome Button

Description
Non illuminated SPST Single Pole Single Throw Off-On latching push button switch with a round actuator and large red button. Silver-plated brass contacts and solder lug terminals. Requires a 12.2mm dia mounting hole and will fit up to 4mm thick panels. Dimensions
Length: 39.5mm including terminals
Length: 33.9mm excluding terminals
Button diameter: 14mm Overal diameter: 16mm Specification
Colour: Red
Type: SPST contact, Off-On operation
Rating: 3A 125V AC
RoHS compliant: Yes Contents of Package
1 x Red latching Single Pole Single Throw push button on-off switch…

Latching SPST On-Off Push Button Switch with Black Dome Button

Latching SPST On-Off Push Button Switch with Black Dome Button

Description
Non illuminated SPST Single Pole Single Throw Off-On latching push button switch with a round actuator and large Black button. Silver-plated brass contacts and solder lug terminals. Requires a 12.2mm dia mounting hole and will fit up to 4mm thick panels. Dimensions
Length: 39.5mm including terminals
Length: 33.9mm excluding terminals
Button diameter: 14mm Overall diameter: 16mm Specification
Colour: Black
Type: SPST contact, Off-On operation
Rating: 3A 125V AC
RoHS compliant: Yes Contents of Package
1 x Black latching push button on-off switch…

LBSCR Wagon Tarpaulins Download 4mm Scale

LBSCR Wagon Tarpaulins Download 4mm Scale

Description Sheet of 8 different London, Brighton & South Coast Railway (LBSCR) wagon tarpaulins in 4mm scale.

These wagon tarpaulin sheets were used to protect many items that were to be transported in open wagons. Each railway company had their own design of sheets. Over the years the sheets faded with wear, and had to be re-sealed and waterproofed. Our sheets are supplied in as new condition, but can be easily weathered to show the look of a worn or old sheet.

It is also possible to add thin cotton to simulate the rope used to secure the sheets.

All tarpaulins are individually numbered.

Each tarpaulin sheet is approximately 87mm x 56mm.

This sheet is available in the following scales
4mm ft 1:76 OO scale

Please select required scale at options listed below Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of 8 London, Brighton & South Coast Railway (LB&SCR) wagon tarpaulins.…

LCDR Wagon Tarpaulins Download 4mm Scale

LCDR Wagon Tarpaulins Download 4mm Scale

Description Sheet of 8 different London, Chatham & Dover Railway (LCDR) wagon tarpaulins in 4mm scale.

These wagon tarpaulin sheets were used to protect many items that were to be transported in open wagons. Each railway company had their own design of sheets. Over the years the sheets faded with wear, and had to be re-sealed and waterproofed. Our sheets are supplied in as new condition, but can be easily weathered to show the look of a worn or old sheet.

It is also possible to add thin cotton to simulate the rope used to secure the sheets.

All tarpaulins are individually numbered.

Each tarpaulin sheet is approximately 87mm x 56mm.

This sheet is available in the following scales
4mm ft 1:76 OO scale

Please select required scale at options listed below. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of 8 London, Chatham & Dover Railway (LCDR) wagon tarpaulins.…

Led Dimmer Controller 3 Button For Single Colour 12v Led Lights

Led Dimmer Controller 3 Button For Single Colour 12v Led Lights

Description This DC12V Mini 3 Key LED dimmer and controller will control most LED strip lights including those made using 3528 5050 5630 SMD single colour LEDs.

Can also be used to control arrays or circuits made up of individual 3 and 5mm LEDs.

Item has 3 buttons. 1 is for control of the 6 different flash modes. 1 is to control the speed of the flashing and one is for brightness control.

Auto memory function to remember last state when switched back on. Dimensions Length: 35mm
Width: 12.6mm
Height: 5.2mm
Wire length: 95mm each end
Overall length: 225 Specification Power Source: 12V DC
Power consumption: 1W
Rated max current: 6Amps
Working temperature: -20degC to 60degC Contents of Package 1 x LED dimmer for LED strips.…

Led Dimmer Remote Control For Single Colour 12v Led Lights

Led Dimmer Remote Control For Single Colour 12v Led Lights

Description This DC12V wireless RF mini remote dimmer and controller that will control most LED strip lights including those made using 3528 5050 5630 SMD single colour LEDs.

Can also be used to control arrays or circuits made up of individual through hole LEDs.

Item has 11 buttons for accurate control of brightness and flash speed with own on/off switch.

Auto memory function to remember last state when switched back on.

This unit requires a 3V CR2025 coin cell battery that is not included. Dimensions Remote Length: 85mm Remote Width: 40mm Remote Depth: 5mm Length: 35mm
Width: 12.6mm
Height: 5.2mm
Wire length: 95mm each end
Overall length: 225 Specification Working voltage: 5 - 24V DC
Rated max current: 6Amps
Working temperature: -20degC to 60degC
Remote control mode: RF Wireless
Remote frequency: 433.92MHz
Remote distance: >30m at open area
Battery Type: CR2025 Contents of Package 1 x Remote Control LED dimmer for LED strips.…

LED Flasher Transistor Chip 1hz Version

LED Flasher Transistor Chip 1hz Version

Description The M34-1 is a low voltage single output LED flashing controller IC implementing LSI CMOS technology. The output can directly drive up to 3 LED’s at the same time.

This small low cost component can be added to any LED circuit to make a fixed LED flash.

With built-in RC oscillator circuit, minimal external components are required.

Various flashing frequencies are available for different applications.

Packaged individually so only buy what you need. Dimensions Length: 4.6mm
Width: 4.7mm
Height: 04.6mm
Pin Diameter: 0.4mm
Total Length: 19.4mm Specification Min Voltage: 1.35vdc
Max Voltage: 5vdc
Typical Voltage: 3vdc
Frequency: 1Hz switching frequency
Package type: TO-92 case
RoHS compliant: Yes Contents of Package 1 x M34-1 1HZ LED flasher chip.…

LED Flasher Transistor Chip 2HZ Version

LED Flasher Transistor Chip 2HZ Version

Description The M34-2 is a low voltage single output LED flashing controller IC implementing LSI CMOS technology. The output can directly drive up to 3 LED’s at the same time.

This small low cost component can be added to any LED circuit to make a fixed LED flash.

With built-in RC oscillator circuit, minimal external components are required.

Various flashing frequencies are available for different applications.

Packaged individually so only buy what you need. Dimensions Length: 4.6mm
Width: 4.7mm
Height: 04.6mm
Pin Diameter: 0.4mm
Total Length: 19.4mm Specification Min Voltage: 1.35vdc
Max Voltage: 5vdc
Typical Voltage: 3vdc
Frequency: 2HZ switching frequency
Package type: TO-92 case
RoHS compliant: Yes Contents of Package 1 x M34-2 2HZ LED flasher chip.…

LED Tester

LED Tester

Description
A handy and versatile LED tester from TruOpto that is suitable for mono colour LEDs as well as bi-colour and tri-colour LEDs of both anode-cathode-anode and cathode-anode-cathode types.

Push button switch to test Test indicator LED Multiple testing holes for comparing colours, brightness, etc. Current testing at 2, 5, 10, 20 and 30mA (mono colour) ACA and CAC testing for bi-, tri-colours LEDs at 20, 50, 70 and 150mA Contents of Package
1 x LED Tester.…

Light Blue Engineers Stretcher Bond Texture Sheet Download

Light Blue Engineers Stretcher Bond Texture Sheet Download

Description Light blue engineers stretcher bond brick paper texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Full bricks measure approximately 3 inches by 9 inches which included half the mortar joints.

Sheet size: A4 284mm x 194mm. Brick courses run parallel to 284mm edge.

This sheet will match any of our light blue engineers stretcher bond brick models exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light blue engineers stretcher bond brick paper.
1 x A4 sheet of printing hints and tips.…

Light Blue Industrial Siding Or Roofing Texture Sheet Download

Light Blue Industrial Siding Or Roofing Texture Sheet Download

Description Light blue industrial siding and roofing material texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

This type of material can be found on the outsides on many modern industrial factory buildings and some smaller garden type buildings.

Sheet size: A4 284mm x 194mm. This sheet also includes a matching strip that can be used as corner and edge covers or roof ridge material.

This sheet will match any of our models that use our light blue industrial siding and roofing texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light blue industrial siding and roofing texture paper.
1 x A4 sheet of printing hints and tips.…

Light Blue Wood With Flaking Paint Texture Sheet Download

Light Blue Wood With Flaking Paint Texture Sheet Download

Description Worn and flaking light blue painted wood texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Planks are a scale 6 inches wide and run parallel to 284mm edge.

By cutting these sheets into strips of three planks it is possible to fold the lower plank behind and add strips like real overlapped planks.

Sheet also contains a strip of matching plain colour.

Sheet size: A4 284mm x 194mm.

This sheet will match any of our models that use our light blue painted wood texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light blue flaking painted wood texture paper.
1 x A4 sheet of printing hints and tips.…

Light Brown Brick English Bond Texture Sheet Download

Light Brown Brick English Bond Texture Sheet Download

Description Light brown brick english bond brick paper texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Full bricks measure approximately 3 inches by 9 inches which included half the mortar joints.

Sheet size: A4 284mm x 194mm. Brick courses run parallel to 284mm edge. Also includes rows of header bricks.

This sheet will match any of our Light brown brick english bond models exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of Light brown brick english bond brick paper.
1 x A4 sheet of printing hints and tips.…

Light Brown Brick Flemish Bond Texture Sheet Download

Light Brown Brick Flemish Bond Texture Sheet Download

Description Light brown brick flemish bond brick paper texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Full bricks measure approximately 3 inches by 9 inches which included half the mortar joints.

Sheet size: A4 284mm x 194mm. Brick courses run parallel to 284mm edge. Also includes rows of header bricks.

This sheet will match any of our Light brown brick flemish bond models exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of Light brown brick flemish bond brick paper.
1 x A4 sheet of printing hints and tips.…

Light Brown Brick Stretcher Bond Texture Sheet Download

Light Brown Brick Stretcher Bond Texture Sheet Download

Description Light brown brick stretcher bond brick paper texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Full bricks measure approximately 3 inches by 9 inches which included half the mortar joints.

Sheet size: A4 284mm x 194mm. Brick courses run parallel to 284mm edge. Also includes rows of header bricks.

This sheet will match any of our Light brown brick stretcher bond models exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of Light brown brick stretcher bond brick paper.
1 x A4 sheet of printing hints and tips.…

Light Brown Industrial Siding Or Roofing Texture Sheet Download

Light Brown Industrial Siding Or Roofing Texture Sheet Download

Description Light brown industrial siding and roofing material texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

This type of material can be found on the outsides on many modern industrial factory buildings and some smaller garden type buildings.

Sheet size: A4 284mm x 194mm. This sheet also includes a matching strip that can be used as corner and edge covers or roof ridge material.

This sheet will match any of our models that use our light brown industrial siding and roofing texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light brown industrial siding and roofing texture paper.
1 x A4 sheet of printing hints and tips.…

Light Brown Split Block Walling Texture Sheet Download

Light Brown Split Block Walling Texture Sheet Download

Description Light brown split block stone walling texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Sheet size: A4 284mm x 194mm. Stone blocks measure a scale 12 inches by 6 inches which includes half a mortar joint.

This sheet will match any of our models that use this light brown split block walling texture.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light brown split block stone walling texture paper.
1 x A4 sheet of printing hints and tips.…

Light Brown Wood With Flaking Paint Texture Sheet Download

Light Brown Wood With Flaking Paint Texture Sheet Download

Description Worn and flaking light brown painted wood texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Planks are a scale 6 inches wide and run parallel to 284mm edge.

By cutting these sheets into strips of three planks it is possible to fold the lower plank behind and add strips like real overlapped planks.

Sheet also contains a strip of matching plain colour.

Sheet size: A4 284mm x 194mm.

This sheet will match any of our models that use our light brown painted wood texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light brown flaking painted wood texture paper.
1 x A4 sheet of printing hints and tips.…

Light Cedar Shingles Texture Sheet Download

Light Cedar Shingles Texture Sheet Download

Description Light cedar shingles texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

This type of material can be found on the sides and roofs of many modern residential buildings to give a nice natural looking decorative finish.

Sheet size: A4 284mm x 194mm.

This sheet will match any of our models that use our light cedar shingles texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of light cedar shingles texture paper.
1 x A4 sheet of printing hints and tips.…

Light Dependent Photoresistor  GL5528

Light Dependent Photoresistor GL5528

Description Compact cadmium sulphide light dependant photo resistor housed in a 5mm diameter package with a 3mm lead pitch.

A photoresistor / light-dependent resistor (LDR) or photocell is a light controlled variable resistor. The resistance of a photoresistor decreases with increasing incident light intensity.

A photoresistor can be applied in light sensitive detector circuits, and light and dark activated switching circuits. Specification Dark resistance: 1MΩ
Resistance @ 10 Lux: 10-20kΩ
Resistance @ 100 Lux: 2-4kΩ
Peak spectral response: 540nm
Max. voltage: 150V peak AC or DC
Power dissipation: 100mW
Lead pitch: 3mm
Operating temperature: –30degC to +70degC Contents of Package 1 x Photoresistor LDR 5mm Light Dependent Resistor Sensor…

Result Pages: