JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Female 2.1mm DC Power Adapter Plug to Screw Terminal Block

Female 2.1mm DC Power Adapter Plug to Screw Terminal Block

Description These 2.1mm DC female jack sockets have a 2.1mm DC socket on one end and a screw terminal block on the other. You only have to screw your cable into the back with no splicing or crimping and plug in.

The terminals are marked with positive and negative terminals to avoid confusion.

Image shows 2 items to show both ends of product. Only one will be supplied.

Sold individually so only buy what you require. Contents of Package 1 x 2.1mm DC female jack socket…

Female Pin To Fit Plug And Socket Kit Connectors

Female Pin To Fit Plug And Socket Kit Connectors

Description Female pin to fit plug and socket kit connectors. Contents of Package 1 x Female connector pin.…

Finder 30.22 DPDT 1.25A BT47W Miniature Relay C/W IC Socket

Finder 30.22 DPDT 1.25A BT47W Miniature Relay C/W IC Socket

Description This Finder sub-miniature 1.25 amp double pole changeover relay has a very low power consumption and is fitted with high sensitive operating coils.

This device is an industry standard low profile power relay and is hermetically sealed as standard with pre-tinned terminals.

Protection category IP67.

Fits standard 16 pin IC socket which is included. Fitting this part allows you to solder connections to the socket and not the relay which makes replacement of the relay easy. Dimensions Length: 20.3mm
Height: 11.4mm
Width: 10.4mm Specification Contact form: 2C (DPDT)
Contact rating: 1.25A @ 250VAC
Contact arrangement: Double pole changeover
Contact material: AgNi
Operate/release: 6ms/4ms
Temperature range: -40degC to +85degC
RoHS compliant: Yes Contents of Package 1 x Finder 30.22 Relay DPDT 1.25A BT47W…

Finder 32.21 SPCO Miniature 6A 12VDC Relay C/W IC Socket

Finder 32.21 SPCO Miniature 6A 12VDC Relay C/W IC Socket

Description This Finder sub-miniature single pole changeover relay has a very low power consumption and is fitted with high sensitive operating coils.

This device is an industry standard low profile power relay and is supplied fully sealed as standard with pre-tinned terminals.

Protection category IP50.

Fits standard 16 pin IC socket which is included. Fitting this part allows you to solder connections to the socket and not the relay which makes replacement of the relay easy. Dimensions Length: 20.3mm
Height: 10mm
Width: 10.7mm Specification Contact form: 1CO (SPDT)
Contact rating: 6A 250VAC
Contact arrangement: Single pole changeover
Contact material: AgNi
Operate/release: 6ms/4ms
Temperature range: -40degC to +85degC
RoHS compliant: Yes Contents of Package 1 x Finder 32.21 miniature 6A 12V DC relay C/W IC socket…

Finder 36.11 12Volt SPCO 10Amp Relay

Finder 36.11 12Volt SPCO 10Amp Relay

Description Miniature single pole changeover SPCO 12volts 10amps sugar cube power relay with solder connections.

Fluxproof, fully sealed construction to IP67 with pre-tinned terminals.

Protection category IP50. Dimensions Length: 19mm
Height: 15mm
Width: 15.2mm Specification Contact form: 1CO (SPDT)
Contact rating: 10A 250VAC
Contact arrangement: Single pole changeover
Contact material: AgNi
Operate/release: 10mS/5mS
Temperature range: -40 to +85°C
RoHS compliant: Yes Contents of Package 1 x Finder 36.11 12 volt SPCO 10 amp relay…

Finder 41.52 DPCO 12Volt 8Amp Relay C/W IC Socket

Finder 41.52 DPCO 12Volt 8Amp Relay C/W IC Socket

Description Low profile miniature PCB mount DPCO 8A non latching power relay with solder connections.

Flux-tight base with pre-tinned terminals.

Protection category IP50.

Fits standard 24 pin IC socket which is included. Fitting this part allows you to solder connections to the socket and not the relay which makes replacement of the relay easy. Dimensions Length: 29mm
Height: 15.7mm
Width: 12.7mm Specification Contact form: 2C (DPDT)
Contact rating: 8A 250VAC/30VDC
Contact arrangement: Double pole changeover
Contact material: AgNi
Operate/release: 7ms/8ms
Temperature range: -40°C to +85°C
RoHS compliant: Yes Contents of Package 1 x Finder 41.52 DPCO 12 volt 8 amp non latching relay…

Finder 41.61 SPCO 12Volt 16Amp Relay C/W IC Socket

Finder 41.61 SPCO 12Volt 16Amp Relay C/W IC Socket

Description Low profile miniature PCB mount SPCO 16A non latching power relay with solder connections.

Flux-tight base with pre-tinned terminals.

Protection category IP50.

Fits standard 24 pin IC socket which is included. Fitting this part allows you to solder connections to the socket and not the relay which makes replacement of the relay easy. Dimensions Length: 29mm
Height: 15.7mm
Width: 12.7mm Specification Contact form: 1C (SPDT)
Contact rating: 16A 250VAC/30VDC
Contact arrangement: Single pole changeover
Contact material: AgNi
Operate/release: 7ms/8ms
Temperature range: -40°C to +85°C
RoHS compliant: Yes Contents of Package 1 x Finder 41.61 SPCO 12 volt 16 amp relay…

Fine grey hand finishing pad

Fine grey hand finishing pad

Description
These fine grey flexible hand pads are non-woven and can be used in a variety of cleaning and finishing applications. They will work either wet or dry. Can be used to clean and finish many parts and models. Can also be used to prepare surfaces before spraying. These pads can also be teased apart to form scenic clumps and small bushes. Pad is 230mm x 150mm x 5mm. Contents of Package
1 x Fine grey hand pad.…

Finger lift double sided tape 12mm x 50m

Finger lift double sided tape 12mm x 50m

Description
50m reel of permanent easy peel double sided 12mm tape with a 18mm backing paper that can be easy lifted from either edge. Tape has a translucent dry adhesive which is clean and easy to use. Ideal for craftwork, art projects, handmade cards, photo mounting and many other uses in railway modelling. Contents of Package
1 x 50m reel of 12mm easy peel double sided tape.…

Finger lift double sided tape 6mm x 50m

Finger lift double sided tape 6mm x 50m

Description
50m reel of easy peel double sided 6mm tape with a 12mm backing paper that can be easy lifted from either edge. Tape has a translucent dry adhesive which is clean and easy to use. Ideal for craftwork, art projects, handmade cards, photo mounting and many other uses in railway modelling. Contents of Package
1 x 50m reel of 6mm easy peel double sided tape.…

Flashing Blue SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Flashing Blue SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Description Flashing Blue 0805 surface mounting LEDs which has a wide viewing angle.

These LEDs flash regularly about once every second.

Compact package only measures 2.0 x 1.25 x 0.8mm.

Cathode is recognisable by the painted mark.

These LEDs DO require a series resistor which is not supplied but are available separately.

If operating from a 9v DC supply use 390R Model Number 216-501 carbon film resistor.

If operating from a 12v DC supply use 560R Model Number 216-503 carbon film resistor.

If operating from a 16v DC supply use 820R Model Number 216-511 carbon film resistor.

These LEDs are supplied in a plastic strip. care should be taken when opening.

Sold individually so only buy what you need.

We sell red and black micro litz wire that can be used with these items. Model numbers 208-750 and 208-751.

For more information on wiring our LEDs Click Here Dimensions Length: 2.0mm
Width: 1.25mm
Height: 0.8mm Specification IFmax: 20mA
VFtyp: 1.9
VFmax: 2.3
Lum. int. (mcd) @ IF (20mA): 150
View angle: 120deg
Wave-length: 600
RoHS compliant: Yes Contents of Package 1 x Blue flashing 0805 surface mount device SMD LED…

Flashing Green SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Flashing Green SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Description Flashing Green 0805 surface mounting LEDs which has a wide viewing angle.

These LEDs flash regularly about once every second.

Compact package only measures 2.0 x 1.25 x 0.8mm.

Cathode is recognisable by the painted mark.

These LEDs DO require a series resistor which is not supplied but are available separately.

If operating from a 9v DC supply use 390R Model Number 216-501 carbon film resistor.

If operating from a 12v DC supply use 560R Model Number 216-503 carbon film resistor.

If operating from a 16v DC supply use 820R Model Number 216-511 carbon film resistor.

These LEDs are supplied in a plastic strip. care should be taken when opening.

Sold individually so only buy what you need.

We sell red and black micro litz wire that can be used with these items. Model numbers 208-750 and 208-751.

For more information on wiring our LEDs Click Here Dimensions Length: 2.0mm
Width: 1.25mm
Height: 0.8mm Specification IFmax: 20mA
VFtyp: 2.0
VFmax: 2.3
Lum. int. (mcd) @ IF (20mA): 150
View angle: 120deg
Wave-length: 520
RoHS compliant: Yes Contents of Package 1 x Green flashing 0805 surface mount device SMD LED…

Flashing Orange SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Flashing Orange SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Description Flashing Orange 0805 surface mounting LEDs which has a wide viewing angle.

These LEDs flash regularly about once every second.

Compact package only measures 2.0 x 1.25 x 0.8mm.

Cathode is recognisable by the painted mark.

These LEDs DO require a series resistor which is not supplied but are available separately.

If operating from a 9v DC supply use 390R Model Number 216-501 carbon film resistor.

If operating from a 12v DC supply use 560R Model Number 216-503 carbon film resistor.

If operating from a 16v DC supply use 820R Model Number 216-511 carbon film resistor.

These LEDs are supplied in a plastic strip. care should be taken when opening.

Sold individually so only buy what you need.

We sell red and black micro litz wire that can be used with these items. Model numbers 208-750 and 208-751.

For more information on wiring our LEDs Click Here Dimensions Length: 2.0mm
Width: 1.25mm
Height: 0.8mm Specification IFmax: 20mA
VFtyp: 1.9
VFmax: 2.3
Lum. int. (mcd) @ IF (20mA): 150
View angle: 120deg
Wave-length: 600
RoHS compliant: Yes Contents of Package 1 x Orange flashing 0805 surface mount device SMD LED…

Flashing Red SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Flashing Red SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Description Flashing Red 0805 surface mounting LEDs which has a wide viewing angle.

These LEDs flash regularly about once every second.

Compact package only measures 2.0 x 1.25 x 0.8mm.

Cathode is recognisable by the painted mark.

These LEDs DO require a series resistor which is not supplied but are available separately.

If operating from a 9v DC supply use 390R Model Number 216-501 carbon film resistor.

If operating from a 12v DC supply use 560R Model Number 216-503 carbon film resistor.

If operating from a 16v DC supply use 820R Model Number 216-511 carbon film resistor.

These LEDs are supplied in a plastic strip. care should be taken when opening.

Sold individually so only buy what you need.

We sell red and black micro litz wire that can be used with these items. Model numbers 208-750 and 208-751.

For more information on wiring our LEDs Click Here Dimensions Length: 2.0mm
Width: 1.25mm
Height: 0.8mm Specification IFmax: 20mA
VFtyp: 1.8
VFmax: 2.2
Lum. int. (mcd) @ IF (20mA): 150
View angle: 120deg
Wave-length: 615
RoHS compliant: Yes Contents of Package 1 x Red flashing 0805 surface mount device SMD LED…

Flashing White SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Flashing White SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Description Flashing White 0805 surface mounting LEDs which has a wide viewing angle.

These LEDs flash regularly about once every second.

Compact package only measures 2.0 x 1.25 x 0.8mm.

Cathode is recognisable by the painted mark.

These LEDs DO require a series resistor which is not supplied but are available separately.

If operating from a 9v DC supply use 390R Model Number 216-501 carbon film resistor.

If operating from a 12v DC supply use 560R Model Number 216-503 carbon film resistor.

If operating from a 16v DC supply use 820R Model Number 216-511 carbon film resistor.

These LEDs are supplied in a plastic strip. care should be taken when opening.

Sold individually so only buy what you need.

We sell red and black micro litz wire that can be used with these items. Model numbers 208-750 and 208-751.

For more information on wiring our LEDs Click Here Dimensions Length: 2.0mm
Width: 1.25mm
Height: 0.8mm Specification IFmax: 20mA
VFtyp: 1.9
VFmax: 2.2
Lum. int. (mcd) @ IF (20mA): 175
View angle: 120deg
Wave-length: 550
RoHS compliant: Yes Contents of Package 1 x White flashing 0805 surface mount device SMD LED…

Flashing Yellow SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Flashing Yellow SMD Surface Mounting 0805 LED 2.0 x 1.25 x 0.8

Description Flashing Yellow 0805 surface mounting LEDs which has a wide viewing angle.

These LEDs flash regularly about once every second.

Compact package only measures 2.0 x 1.25 x 0.8mm.

Cathode is recognisable by the painted mark.

These LEDs DO require a series resistor which is not supplied but are available separately.

If operating from a 9v DC supply use 390R Model Number 216-501 carbon film resistor.

If operating from a 12v DC supply use 560R Model Number 216-503 carbon film resistor.

If operating from a 16v DC supply use 820R Model Number 216-511 carbon film resistor.

These LEDs are supplied in a plastic strip. care should be taken when opening.

Sold individually so only buy what you need.

We sell red and black micro litz wire that can be used with these items. Model numbers 208-750 and 208-751.

For more information on wiring our LEDs Click Here Dimensions Length: 2.0mm
Width: 1.25mm
Height: 0.8mm Specification IFmax: 20mA
VFtyp: 1.9
VFmax: 2.3
Lum. int. (mcd) @ IF (20mA): 140
View angle: 120deg
Wave-length: 595
RoHS compliant: Yes Contents of Package 1 x Yellow flashing 0805 surface mount device SMD LED…

Flat Retaining Wall With Buttresses Download 4mm Scale

Flat Retaining Wall With Buttresses Download 4mm Scale

Description This 4mm ft 1:76 OO scale downloadable kit contains all that you need to print and make a model of a retaining wall to a maximum of 20 foot high. By printing more copies of the files, the wall can be made to any length you require. The kit can be made with or without the abutments. The height can also be reduced if required by removing a portion of the top or bottom on the template and texture sheets.

Retaining walls are found in many railway locations and were built to hold back the ground when cuttings were made.

Basic instructions are supplied as are a few images of completed sections of walls.

This model is of the same quality as all our models and texture sheets.

It is also possible to use the template supplied with any of our other downloadable texture sheets.

Sheet size: A4 284mm x 194mm. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of retaining wall textures.
1 x A4 sheet of templates.
1 x Set of basic instructions…

Flicker Free Kit For DCC Coach Lighting

Flicker Free Kit For DCC Coach Lighting

Description A kit of components that when assembled will make a small compact flicker free unit that can be used for coach lighting on DCC layouts.

Comes with everything needed including wire and assortment of resistors to adjust brightness of leds.

Assembled unit is small enough to fit into most scale of coaches.

This kit of parts does require soldering.

An assembly and wiring image is supplied. Contents of Package 1 x 100uf 25v capacitor 6mm dia x 11mm long
1 x Bridge Rectifier 1.5A 50V
1 x Selection of resistors
2 x Small lengths of 3:1 black heat shrink to insulate wires
1 x Large piece of heat shrink to insulate completed item
1 x 200mm length black wire
1 x 200mm length red wire
1 x 200mm length yellow wire
1 x wiring diagram

Flint And Brick Walling Texture Sheet Download

Flint And Brick Walling Texture Sheet Download

Description Flint and brick walling texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Sheet size: A4 284mm x 194mm. Stone courses run parallel to 294mm edge. This sheet also includes a matching strip that can be used as quoins, window surrounds, window sills and ledges and other decorative areas.

This sheet will match any of our models that use our flint and brick walling texture exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of flint and brick walling texture paper.
1 x A4 sheet of printing hints and tips.…

Flint Walling Texture Sheet Download

Flint Walling Texture Sheet Download

Description Flint walling texture sheet for download and printing in 3mm, 4mm and 7mm scales, which can be used for kit bashing, scratch building your own models, or modifying our kits.

Paper size: A4. Printed area (approx): 274mm x 194mm.

This sheet will match any of our models that use our flint walling textures exactly.

This sheet is available in the following scales
3mm ft 1:101.6 TT scale
4mm ft 1:76 OO scale
7mm ft 1:43.5 O scale

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x A4 sheet of flint walling texture paper.
1 x A4 sheet of printing hints and tips.…

Free Metric And Imperial Scale Rulers Download

Free Metric And Imperial Scale Rulers Download

Description Scale metric and imperial scale rules. Imperial rule is marked in 3 inch and foot intervals. The metric rule is marked at 10cm intervals, half a meter intervals and meter intervals.

Scale rules are available in
2mm ft, 1:148, N scale
3mm ft, 1:101.6, TT scale
3.5mm ft, 1:87, HO scale
4mm ft, 1:76, OO scale
7mm ft, 1:43.5, O scale

The page should be printed at a high resolution on good quality A4 photo matte paper for best results. If your printout has lines missing you need to increase the printers resolution.

Please select required scale at options listed below otherwise item will not add to cart. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x Metric and imperial scale rulers…

Free Model Railway Dimensions And Clearances Guide

Free Model Railway Dimensions And Clearances Guide

Description This free download includes an image and chart of minimum clearance measurements used in railway modelling. The chart includes actual and scale measurements in the most popular scales.

Be sure to select the option below. Download information (Please read before adding any files to your basket) You are purchasing a digital texture sheet product, and no physical item is sent. A download link will be available when you return to the website after making your payment, or by logging in to your Railwayscenics account and checking your recent orders. Should you not return to the website after making your payment please read the following page on download help.

This download product will require additional software to open the zipped folders and read the PDF files included. Please ensure that you have suitable software on your device before purchasing this product.

This download texture sheet will need to be printed before use.

You agree that adding this product to your cart will allow us to supply the download during the legal 14 day cooling off period and you acknowledge that your right to cancel the contract will be lost with this consent to start the supply of the digital content. DO NOT add this to your cart if you do not agree to this. Contents of downloads file 1 x Free dimensions and clearances guide.…

Free Standing Ventilated PSU Enclosure Large

Free Standing Ventilated PSU Enclosure Large

Description A large free standing power supply case moulded in 1.2mm thick flame-retardant UL 94V-0 black ABS and with shuttered ventilation slots on all sides.

This case will accommodate our range of 25 to 50VA open chassis transformers.

The two halves of the case are held together by four self-tapping screws which are supplied.

Both ends of the case have rectangular cut-outs which are approx 10 x 8mm for cable entry and exit.

Top of the case has recessed area for labels.

RoHS compliant: Yes Dimensions Length: 130mm.
Width: 92mm.
Height: 67mm. Contents of Package 1 x Large free standing ventilated PSU enclosure…

Free Standing Ventilated PSU Enclosure Small

Free Standing Ventilated PSU Enclosure Small

Description A small free standing power supply case moulded in 1.2mm thick flame-retardant UL 94V-0 black ABS and with shuttered ventilation slots on all sides.

This case will accommodate our range of 12 to 20va open chassis transformers.

The two halves of the case are held together by four self-tapping screws which are supplied.

Both ends of the case have rectangular cut-outs which are approx 10 x 8mm for cable entry and exit.

Top of the case has recessed area for labels.

RoHS compliant: Yes Dimensions Length: 100mm.
Width: 70mm.
Height: 58mm. Contents of Package 1 x Small free standing ventilated PSU enclosure…

Result Pages: