JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

  • Basket cart empty
  • In Your Basket

    0 item(s) totalling £0.00
1 Amp Fixed Voltage Regulator +12 Volts

1 Amp Fixed Voltage Regulator +12 Volts

Description Linear 1 amp 12 volt fixed voltage regulator in a TO220 package.

Internal current limiting, thermal shut-down and safe area protection.

Ideally a heat sink should be used with this product for safety. Dimensions Height: 15.25mm
Width: 10mm
Depth: 4.4mm
Pin Length: 13mm Specification Max Supply voltage: 35V
Output voltage: 12V
Output current: 1A
Dropout voltage: 2V
RoHS compliant: Yes Contents of Package 1 x 1 amp fixed voltage regulator +12 Volts.…

1 Amp Fixed Voltage Regulator +15 Volts

1 Amp Fixed Voltage Regulator +15 Volts

Description Linear 1 amp 15 volt fixed voltage regulator in a TO220 package.

Internal current limiting, thermal shut-down and safe area protection.

Ideally a heat sink should be used with this product for safety. Dimensions Height: 15.25mm.
Width: 10mm.
Depth: 4.4mm.
Pin Length: 13mm. Specification Max Supply voltage: 35V
Output voltage: 15V
Output current: 1A
Dropout voltage: 2V
RoHS compliant: Yes Contents of Package 1 x 1 amp fixed voltage regulator +15 Volts.…

1 Amp Fixed Voltage Regulator +5 Volts

1 Amp Fixed Voltage Regulator +5 Volts

Description Linear 1 amp 5 volt fixed voltage regulator in a TO220 package.

Internal current limiting, thermal shut-down and safe area protection

Ideally a heat sink should be used with this product for safety. Dimensions Height: 15.25mm
Width: 10mm
Depth: 4.4mm
Pin Length: 13mm Specification Max Supply voltage: 35V
Output voltage: 5V
Output current: 1A
Dropout voltage: 2V
RoHS compliant: Yes Contents of Package 1 x 1 amp fixed voltage regulator +05 Volts.…

1 Metre Coil 7/0.127 mm Black Fine Equipment Wire

1 Metre Coil 7/0.127 mm Black Fine Equipment Wire

Description 1 metre coil of 7/0.127 mm 28 AWG black stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Black
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Black fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Blue Fine Equipment Wire

1 Metre Coil 7/0.127 mm Blue Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Blue stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Blue
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Blue fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Brown Fine Equipment Wire

1 Metre Coil 7/0.127 mm Brown Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Brown stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Brown
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Brown fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Green Fine Equipment Wire

1 Metre Coil 7/0.127 mm Green Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Green stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Green
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Green fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Grey Fine Equipment Wire

1 Metre Coil 7/0.127 mm Grey Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Grey stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Grey
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Grey fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Orange Fine Equipment Wire

1 Metre Coil 7/0.127 mm Orange Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Orange stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Orange
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Orange fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Purple Fine Equipment Wire

1 Metre Coil 7/0.127 mm Purple Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Purple stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Purple
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Purple fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Red Fine Equipment Wire

1 Metre Coil 7/0.127 mm Red Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Red stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Red
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Red fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm White Fine Equipment Wire

1 Metre Coil 7/0.127 mm White Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG White stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: White
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm White fine multi strand equipment wire.…

1 Metre Coil 7/0.127 mm Yellow Fine Equipment Wire

1 Metre Coil 7/0.127 mm Yellow Fine Equipment Wire

Description A 1 metre coil of 7/0.127 mm 28 AWG Yellow stranded layout equipment wire. This is ideal for locomotive internal wiring and also for use with DCC decoders and stay alive units.

As this wire is flexible it can also be used for coach and vehicle lighting applications.

Where multiple quantities are ordered we will ship in one length where possible.

See other listings for alternative colours. Specifications Sheath Colour: Yellow
Core Strands: 7/0.127 mm
Insulation Material: PTFE
Outer Diameter: 0.74mm
American Wire Gauge: 28 AWG
Conductor Material: Stranded Silver Plated Copper
Minimum Operating Temperature: -15degC
Maximum Operating Temperature: +105degC
Standards Met: UL 758
Insulation Wall Thickness: 0.15mm
Cable Type: Single Core
RoHS compliant: Yes Contents of package 1 x 1 metre coil of 7/0.127 mm Yellow fine multi strand equipment wire.…

1 Pair Of Power Feed Joiners For Code 100/124 Rail Track

1 Pair Of Power Feed Joiners For Code 100/124 Rail Track

Description Code 100 pre wired fishplates ideal for connecting DCC dropper wires to your bus cables. We do not use thin 7/0.2 cable like other suppliers.

Suitable for OO/HO Code 100, O-16.5/On30 Code 100 and O Scale Code 124 Bull Head rail profiles.

Being unable to solder is no longer a problem. Our pre wired fishplates come with 250 mm of 16/0.2mm wire in the colour of your choice to match your power cable wiring.

Just drill a small hole under the track joint and drop the wires through, they can then be fixed using a red scotchlok or other method to your chosen power supply without the need for soldering.

Just let us know the colour of the wires you require in the comments box when completing your order. If you do not let us know your colour preference we will send equal quantities of black and red wired fishplates.

Wire is available in Black, blue, brown, green, grey, orange, pink, red, violet, white and yellow.

Peco have released these items under part number PL-80. Contents of Package 1 x Pre wired fish plates for code 100 track.…

1 Pair Of Power Feed Joiners For Code 70 75 And 83 Rail Track

1 Pair Of Power Feed Joiners For Code 70 75 And 83 Rail Track

Description A pair of pre wired code 75 fishplates ideal for connecting DCC dropper wires to your bus cables.

Suitable for HOn3 Code 70, OO/HO Code 75 and HOm Code 75 rail profiles.

Being unable to solder is no longer a problem. Our pre wired fishplates come with aprox 250mm of 16/0.2mm wire in the colour of your choice to match your power cable wiring.

Just drill a small hole under the track joint and drop the wires through, they can then be fixed using a red scotchlok or other method to your chosen power supply without the need for soldering.

Just let us know the colour of the wires you require in the comments box when completing your order. If you do not let us know your colour preference we will send equal quantities of black and red wired fishplates.

Wire is available in Black, blue, brown, green, grey, orange, pink, red, violet, white and yellow.

Peco have released these items under part number PL-81. Contents of Package 1 x Pre wired fish plates for code 70, 75 and 83 track.…

1 Pair Of Power Feed Joiners For Code 80 Or 55 Rail Track

1 Pair Of Power Feed Joiners For Code 80 Or 55 Rail Track

Description Code 80 or 55 pre wired fishplates using Peco SL-310 metal rail joiners and are ideal for connecting DCC dropper wires to your bus cables. We do not use thin 7/0.2 cable like other suppliers.

Suitable for N Scale Code 55, 80, OO-9/HO2.5 Code 80 rail profiles.

Being unable to solder is no longer a problem. Our pre wired fishplates come with about 250 mm of 16/0.2mm wire in the colour of your choice to match your power bus cable wiring.

Just drill a small hole under the track joint and drop the wires through, they can then be fixed using a red scotchlok or other method to your chosen power supply without the need for soldering.

Just let us know the colour of the wires you require in the comments box when completing your order. If you do not let us know your colour preference we will send equal quantities of black and red wired fishplates.

Wire is available in Black, blue, brown, green, grey, orange, pink, red, violet, white and yellow.

Peco have released these items under part number PL-82. Contents of Package 1 x Pair of power feed joiners for code 80 or 55 rail track.…

1.00mm Red Single Bootlace Cord End Ferrule Pkt 25

1.00mm Red Single Bootlace Cord End Ferrule Pkt 25

Description These single Red insulated crimp bootlace ferrules cord end terminals provide a neat way to end termination to multi-stranded wires and cables.

The ferrules reduce the possibility of wire strands short circuiting adjacent terminals and ensure a positive connection when used with terminal blocks and captive terminals, and also give a better connection.

Suitable for use with all of our multi and single core 32/0.2mm wire and cables.

RoHS compliant: Yes Dimensions Wire cross-section: 1.00mm
Barrel length: 6mm Specification Colour: Red
Tip type: Bootlace ferrule
Ferrule variant: Insulated
Contact material: Copper
Insulator material: Polypropylene
Contact plating: Tinned
Operating Temperature: -40degC to +105degC
Mounting: Crimped or solder on cable Contents of Package 25 x Red 1.00mm insulated bootlace cord end ferrule.…

1.00mm Yellow Single Bootlace Cord End Ferrule Pkt 25

1.00mm Yellow Single Bootlace Cord End Ferrule Pkt 25

Description These single Yellow insulated crimp bootlace ferrules cord end terminals provide a neat way to end termination to multi-stranded wires and cables.

The ferrules reduce the possibility of wire strands short circuiting adjacent terminals and ensure a positive connection when used with terminal blocks and captive terminals, and also give a better connection.

Suitable for use with all of our multi and single core 32/0.2mm wire and cables.

RoHS compliant: Yes Dimensions Wire cross-section: 1.00mm
Barrel length: 6mm Specification Colour: Yellow
Tip type: Bootlace ferrule
Ferrule variant: Insulated
Contact material: Copper
Insulator material: Polypropylene
Contact plating: Tinned
Operating Temperature: -40degC to +105degC
Mounting: Crimped or solder on cable Contents of Package 25 x Yellow 1.00mm insulated bootlace cord end ferrule.…

1.0mm Micro Carbide Drill With 3.175mm 1/8th inch Shank

1.0mm Micro Carbide Drill With 3.175mm 1/8th inch Shank

Description 1.0mm Diameter large shank micro drill bit is ideal for the delicate drilling of hard materials for model engineering, jewellery making and model making.

It is especially suited for drilling printed circuit boards. Made of fibreglass, printed circuit boards require a tough micro drill and these tungsten carbide drills will outperform similar HSS drill bits.

Extra care is needed when handling and using these micro drills as they are very delicate, especially the smaller sizes.

The large 3.175mm 1/8th inch shank reduces the risk of drill breakage.

Overall length approximately 38mm.

These drill bits are fitted with drill collars for ease of use and identification and colours may differ from image.

These can be used to replace those drills broken in our large shank drill sets. Contents of Package 1 x 1.0mm large shank tungsten carbide drill bit…

1.0mm Red Twin Bootlace Cord End Ferrule Pkt 25

1.0mm Red Twin Bootlace Cord End Ferrule Pkt 25

Description Red 1.0mm Insulated twin cord ferrules are designed to form a neat end termination to multi-strand cables and wires.

The ferrules reduce the possibility of wire strands short circuiting adjacent terminals and ensure a positive connection when used with terminal blocks and captive terminals.

Suitable for use with two of our multi and single core 16/0.2mm wire and cables.

RoHS compliant: Yes Dimensions Wire cross-section: 1.0mm
Barrel length: 8mm Specification Colour: Red
Tip type: Twin bootlace ferrule
Ferrule variant: Insulated
Contact material: Copper
Insulator material: Polypropylene
Contact plating: Tinned
Operating Temperature: -40degC to +105degC
Mounting: Crimped or solder on cable Contents of Package 25 x Red 1.0mm insulated bootlace cord end ferrule.…

1.1amp 30volt Resettable PPTC Fuse

1.1amp 30volt Resettable PPTC Fuse

Description 1.1 Amp resettable PPTC (Polymeric Positive Temperature Coefficient) device or Polyswitch device provides over current circuit protection for a wide range of equipment. The fuses are reset by removing the supply voltage and fault condition.

Switch off times are comparable to a slow blow fuse. Dimensions A: 7.4mm
B: 14.2mm
C: 5.1mm
D: 7.6mm
E: 3.0mm
Lead Dia: 0.81mm Specification Rated Voltage: 30v
Hold Current: 1.1A
Trip Current: 2.2A
Package Type: 1
RoHS compliant: Yes
PDF data sheet: Yes Technical Specification Contents of Package 1 x 1.1amp Resettable PPTC Fuse…

1.1mm Micro Carbide Drill With 3.175mm 1/8th inch Shank

1.1mm Micro Carbide Drill With 3.175mm 1/8th inch Shank

Description 1.1mm Diameter large shank micro drill bit is ideal for the delicate drilling of hard materials for model engineering, jewellery making and model making.

It is especially suited for drilling printed circuit boards. Made of fibreglass, printed circuit boards require a tough micro drill and these tungsten carbide drills will outperform similar HSS drill bits.

Extra care is needed when handling and using these micro drills as they are very delicate, especially the smaller sizes.

The large 3.175mm 1/8th inch shank reduces the risk of drill breakage.

Overall length approximately 38mm.

These drill bits are fitted with drill collars for ease of use and identification and colours may differ from image.

These can be used to replace those drills broken in our large shank drill sets. Contents of Package 1 x 1.1mm large shank tungsten carbide drill bit…

1.2mm Micro Carbide Drill With 3.175mm 1/8th inch Shank

1.2mm Micro Carbide Drill With 3.175mm 1/8th inch Shank

Description 1.2mm Diameter large shank micro drill bit is ideal for the delicate drilling of hard materials for model engineering, jewellery making and model making.

It is especially suited for drilling printed circuit boards. Made of fibreglass, printed circuit boards require a tough micro drill and these tungsten carbide drills will outperform similar HSS drill bits.

Extra care is needed when handling and using these micro drills as they are very delicate, especially the smaller sizes.

The large 3.175mm 1/8th inch shank reduces the risk of drill breakage.

Overall length approximately 38mm.

These drill bits are fitted with drill collars for ease of use and identification and colours may differ from image.

These can be used to replace those drills broken in our large shank drill sets. Contents of Package 1 x 1.2mm large shank tungsten carbide drill bit…

1.35amp 30volt Resettable PPTC Fuse

1.35amp 30volt Resettable PPTC Fuse

Description 1.35 Amp resettable PPTC (Polymeric Positive Temperature Coefficient) device or Polyswitch device provides over current circuit protection for a wide range of equipment. The fuses are reset by removing the supply voltage and fault condition.

Switch off times are comparable to a slow blow fuse. Dimensions A: 8.9mm
B: 13.5mm
C: 5.1mm
D: 7.6mm
E: 3.0mm
Lead Dia: 0.81mm Specification Rated Voltage: 30v
Hold Current: 1.35A
Trip Current: 2.7A
Package Type: 1
RoHS compliant: Yes
PDF data sheet: Yes Technical Specification Contents of Package 1 x 1.35amp Resettable PPTC Fuse…

Result Pages: